• New
SIBAX NS88 polyurethane gun foam, 750ml

SIBAX NS88 polyurethane gun foam, 750ml

€5.99
Tax included
SIBAX NS88 is a high-yield polyurethane gun foam designed for professional filling, sealing and insulation applications. Application with a foam gun allows easier and more controlled dosing, while controlled expansion helps reduce pressure on window and door frames.
The foam provides strong adhesion to common building materials, cures quickly, does not sag on vertical surfaces and can be reused if the applicator gun remains attached to the can.
Quantity

In our warehouse: +10
You have questions about SIBAX NS88 polyurethane gun foam, 750ml ?
Our specialists will consult and answer your questions.

Ask question
  Secure Payment

Pay via E-Banking, Bank Card or at a Point of Sale.

  Fast Delivery

Fast order processing and fast delivery.

  Free Pickup

Pick up at Kalvarijos str. 130, Kaunas.

Product photos are for illustrative purposes only, the original products may differ slightly from those shown in the online store.

Description

Technical information
Product type: polyurethane gun foam
Volume: 750 ml
Colour: light yellow
Density: 18–20 kg/m³
Yield: 55–60 l / 1000 ml
Fire class: B3
Shrinkage: max. 5%
Expansion: 50–80%
Tack-free time: 8–10 min
Cutting time: 25–35 min
Complete drying time: 8–16 hours
Thermal stability: from -50 °C to +100 °C
Application: foam gun

Benefits
✔ High yield
✔ Easy and controlled application with a gun
✔ Controlled expansion
✔ Low pressure on door and window frames
✔ Fast curing
✔ Cuttable after approximately 25–35 minutes
✔ Non-sag on vertical surfaces
✔ Strong adhesion to common building materials
✔ Reusable when the gun remains attached
✔ Thermal stability from -50 °C to +100 °C

Application areas
Filling and insulating gaps around windows
Filling and insulating gaps around door frames
Sealing pipe penetration gaps
Gas, water and electrical installation work
Filling irregular gaps, cracks and holes
Construction and installation applications

Surface preparation
Application surfaces must be clean, dry and free from oil, rust and loose particles. Slightly moistening the surface may improve foam performance and speed up curing.

Important
Foam exposed to UV radiation should be protected with paint, plaster, mastic or another suitable covering.
Strong adhesion cannot be achieved on Teflon, PE and PP plastics.
Uncured foam can be cleaned with foam cleaner or an acetone-type solvent.
Hardened foam can only be removed mechanically.

Storage
Store upright in a cool and dry environment at temperatures between +10 °C and +30 °C.
Shelf life: 15 months when stored under the recommended conditions.

Product Details
96001149
312 Items

Specific References

New product
Related Products ( 16 other products in the same category )

New Account Register

Already have an account?
Log in instead Or Reset password