Technical information
Product type: high-yield polyurethane gun foam
Volume: 850 ml
Colour: light yellow
Density: 16–18 kg/ml
Yield: 60–65 l / 1000 ml
Expansion: 30–50%
Volume loss: 5%
Tack-free time: 7–10 min
Cutting time: 25–35 min
Fully drying time: 12–24 hours
Application temperature: +5 °C to +30 °C
Temperature stability: -50 °C to +100 °C
Application: foam gun
Benefits
✔ High yield
✔ Low expansion
✔ High insulation value
✔ Very fast curing
✔ Low pressure on substrates
✔ Strong adhesion to most suitable surfaces
✔ Easy and controlled application with a gun
✔ Suitable for professional construction work
Application areas
Filling and insulating gaps around window frames
Filling cracks and gaps in buildings
Filling and insulating joints
Sealing construction openings
Thermal and acoustic insulation work
Construction and installation applications
Surface preparation
Application surfaces must be clean, dry and free from oil, rust and loose particles. Slightly moistening the surfaces may improve foam performance and drying speed.
Important
Foam exposed to UV radiation should be protected with paint or mastic.
Strong adhesion cannot be achieved on Teflon, PE and PP plastics.
Uncured foam can be cleaned with foam cleaner or an acetone-type solvent.
Hardened foam can only be removed mechanically.
Storage
Store upright in a cool and dry environment at temperatures between +10 °C and +30 °C.
Shelf life: 15 months when stored under the recommended conditions.