Technical information
Product type: one-component polyurethane sealant
Volume: 600 ml
Packaging: aluminium sausage
Colours: white, black, grey
Application temperature: +5 °C to +35 °C
Service temperature: -30 °C to +90 °C
Density: 1.16 ± 0.05 g/cm³
Tack-free time: approx. 30 min
Curing rate: 3–4 mm / 24 h
Hardness: 40 ± 5 Shore A
Elongation at break: > 480%
Elastic recovery: > 80%
Elastic modulus at 100%: 0.40 N/mm²
Flowing: < 3 mm
Water resistance: D4
Benefits
✔ One-component and ready to use
✔ Easy application
✔ Fast curing
✔ Permanently elastic
✔ Non-sag
✔ Weather resistant
✔ UV resistant
✔ Can be overpainted
✔ Waterproof after curing
✔ Excellent adhesion to many building materials
✔ High chemical resistance
Application areas
Indoor and outdoor sealing
Construction joints
Concrete bonding and sealing
Metal assembly
Wood sealing and bonding
PVC applications
Sandwich panel assembly and insulation
Roof and facade applications
Automotive manufacturing
Containers and trucks
Roof and terrace expansion joints
Parapet corner joints
Surface preparation
Surfaces must be clean, dry and free from oil, dust and rust. Existing sealant should be removed mechanically. Masking tape may be used to obtain clean joint edges.
A suitable primer may be required on some surfaces to improve adhesion.
Important
The sealant cures with moisture from the air and should not be used in fully enclosed areas.
It can be overpainted, but the paint may crack due to joint movement.
Long-term UV exposure may cause discolouration.
Hardened sealant can only be removed mechanically.
Storage
Store in the original closed packaging in a cool and dry place between +5 °C and +25 °C.
Shelf life: 12 months from the production date.