Technical information
Product type: polyurethane filling foam
Volume: 750 ml
Colour: light yellow
Density: 24–28 kg/m³
Yield: 35–45 l / 1000 ml
Fire class: B3
Shrinkage: max. 5%
Expansion: 150–180%
Tack-free time: 8–10 min
Cutting time: 30–40 min
Complete drying time: 12–24 hours
Thermal stability: from -50 °C to +100 °C
Benefits
✔ Suitable for filling and insulation
✔ Low pressure on application substrates
✔ Fast curing
✔ Good cell structure and stability
✔ No shrinkage
✔ Semi-flexible structure
✔ Suitable for construction and installation work
✔ Thermal stability from -50 °C to +100 °C
Application areas
Filling gaps around window frames
Filling gas pipe penetration gaps
Plumbing installation gaps
Electrical installation gaps
Filling holes, cracks and gaps in buildings
Thermal and acoustic insulation work
Panel mounting
Air conditioning installation
Air vent installation
Surface preparation
Application surfaces must be clean, dry and free from oil, rust and loose particles. Slightly moistening the surfaces may improve foam performance and speed up curing.
Important
Foam exposed to UV radiation should be protected with paint or mastic.
Strong adhesion cannot be achieved on Teflon, PE and PP plastics.
Uncured foam can be cleaned with foam cleaner or an acetone-type solvent.
Hardened foam can only be removed mechanically.
Storage
Store upright in a cool and dry environment at temperatures between +10 °C and +30 °C.
Shelf life: 15 months when stored under the recommended conditions.