A spray gun is a necessary tool for the correct application of glue.

Cover both surfaces to be glued with glue. The surface must be clean and dry, free of dust. The temperature of the premises and materials should be 15-25 °C, the glue should be sprayed at a distance of 15-25 cm from the surfaces to be glued. Ideal gluing will be possible only after covering 80-100% of the surface with a thin and even layer of glue. Optimally, the surface covered with glue will look like it is covered with a fine mesh. Do not try to apply a thick layer of glue, because its excess always spills over the sides. When the surfaces are covered with glue, let the glue dry for about 30-60 seconds (the layer of glue no longer sticks to your hands). When the thinner evaporates, firmly press the surfaces to be glued, you can also use a press. For hard-to-absorb surfaces, it is recommended to additionally cover the glue with a second layer, after the solvent from the first layer has evaporated, which will strengthen the strength of the glue seam.